![RY10MKPRO](https://rynoworx.com/wp-content/uploads/2021/07/RY10MKPRO-1.jpg)
Safety Is Built In
CSA/UL approved regulator, fuel lines, flame-out sensor and engineered heat shielding work together to create a safer operating experience. Safety
clamps, keep your lid securely
fastened during transport.
Easy To Operate
No more wasting time searching for a striker, lighter or matches. Starting a melter has never been easier with our push button
electric ignition and two independently operated burners.
Reliable
Productive
Melts and applies up-to 50% more hot crack fill per day while using less than half the fuel compared to traditional ‘torch’ fired melter kettles
![RY10MKPRO](https://rynoworx.com/wp-content/uploads/2021/07/RY10MKPRO-2.jpg)
Model:
RY10MK-Pro
Version:
MLT-0009
Published:
08/05/2020
10-gallon Direct Fired Melter Kettler
The RY10MK-PRO is a portable Crack Fill Kettle designed to be free standing or optionally bolted to any truck or trailer.
Its heavy-duty molasses valve allows you to control the flow of material into any pour-pot or bander. Safety, reliability and
efficiency combine in this machine to create a contractor’s must-have.
Featured In
Safety Built In
Safer Fuel Lines
Fully Equipped with CSA/UL approved regulator to provide precise control over fuel flow to the kettle.”
![Heat Shielded Fuel Lines Image Heat Shielded Fuel Lines Image](https://rynoworx.com/wp-content/uploads/2015/10/Melter-Kettle-Regulator.jpg)
Flame-Out Sensor
The sealed burner is equipped with a CSA / UL approved flameout sensor which detects flameouts commonly caused by wind and prevents fuel from flowing to the burner
![flame sensor Flame out sensor](https://rynoworx.com/wp-content/uploads/2021/06/flame-sensor.jpg)
1/2″ Holes
holes in leg channels allow for safe and easy mounting to any truck or trailer
![_Mounting-Holes Flame out sensor](https://rynoworx.com/wp-content/uploads/2021/07/Mounting-Holes-1.jpg)
Safety Latch
Kettle is equipped with a latch, which helps keep your lid securely fastened while moving from job to job.
![latch_2 Heat Shield](https://rynoworx.com/wp-content/uploads/2021/07/latch_2.jpg)
Easy to Operate
Molasses Valve
2″ molasses valve quickly and conveniently dispenses melted crack filler
![molasses_valve Push Button Start](https://rynoworx.com/wp-content/uploads/2021/07/molasses_valve-1.jpg)
Manual Agitation
Standard manual agitation allows for easy mixing of material as it melts
![manual_agitation_RY10MK-Pro Side by Side Controls](https://rynoworx.com/wp-content/uploads/2021/07/manual_agitation_RY10MK-Pro.jpg)
Electric Ignition
No more wasting time searching for a striker, lighter or matches. Starting a melter has never been easier with our push button electric ignition
![ignition Push Button Start](https://rynoworx.com/wp-content/uploads/2021/07/ignition.jpg)
Reliable
Liquid-Filled Thermometer
The unique liquid-filled thermometer is highly resistant to damage caused by constant vibrations during regular use, which ensures a reliable temperature reading every time
![thermometer Rear Wheel Assy with Bearings - Melter Applicator](https://rynoworx.com/wp-content/uploads/2021/06/thermometer.jpg)
Sealed Burner
The enclosed burner design is shielded from the elements and virtually eliminates flame-outs caused by wind, which are common to torch-fired models.
![sealed-burner Dual Front Casters](https://rynoworx.com/wp-content/uploads/2021/07/sealed-burner.jpg)
Built-in Strainer
Built-in strainer prevents valve clogs from unmelted pieces of rubber
![strainer Sealed Burner](https://rynoworx.com/wp-content/uploads/2021/07/strainer.jpg)
Productive
%
Faster
Melt crack sealant up to 50% faster than torch-fired models and allows you to apply up to 4800ft of crack filler per day.
Side-by-Side controls reduce operator fatigue, allowing you to get more done in less time.
%
Less Fuel
The Optimized burnet/kettle design provides even heat distribution during the melting process: this eliminates downtime caused by material crystallization common to torch-fired models.
The sealed burner consumes nearly 50% less fuel than traditional torch-fired melter kettles
RY10MK
Melter-Applicator- 101bs/46kgs Assembled
- 14 Gauge Steel
- Powder Coated Steel Frame
- 2″ Molasses Valve
- 150,000 BTU Heating Torch
- 10 US Gallons
- 5PSI Max Fuel Pressure
- Up To 3200 Feet per day
RY10MK-PRO
Melter Kettle- 125bs/57kgs Assembled
- 14 Gauge Steel
- Powder Coated Steel Frame
- 2″ Molasses Valve
- 50,000 BTU Sealed Burner
- 10 US Gallons
- 5PSI Max Fuel Pressure
- Up To 4800 Feet per day
RY30MK
Melter-Applicator- 189lbs/86kgs Assembled
- 14 Gauge Steel
- Powder Coated Steel Frame
- 2″ Molasses Valve
- 150,000 BTU Heating Torch
- 30 US Gallons
- 5PSI Max Fuel Pressure
- Up To 7200 Feet per day
RY30MK-PRO
Melter Kettle- 257lbs/117kgs Assembled
- 14 Gauge Steel
- Powder Coated Steel Frame
- 2″ Molasses Valve
- Dual 50,000 BTU Sealed Burner
- 30 US Gallons
- 5PSI Max Fuel Pressure
- Up To 9600 Feet per day
Ready to Buy?
The RY10 Pro is a must-have for any serious asphalt maintenance contractor.