Safety Is Built In
CSA/UL approved regulator, fuel lines, flame-out sensor and engineered heat shielding work together to create a safer operating experience. Safety
clamps, keep your lid securely
fastened during transport.
Easy To Operate
No more wasting time searching for a striker, lighter or matches. Starting a melter has never been easier with our push button
electric ignition and two independently operated burners.
Reliable
Productive
Melts and applies up-to 50% more hot crack fill per day while using less than half the fuel vs ‘torch’ fired melter kettles
Model:
RY30MK-Pro
Version:
MLT-0008
Published:
08/05/2020
world’s first 30-gallon Direct Fired Melter Kettler
The RY30MK-PRO is the world’s first 30-gallon Direct Fired Crack Fill Melter Kettle featuring dual internal burners. This kettle is designed to be free standing, or bolted to a truck, or trailer. Heavy-duty molasses valve allows you to control the flow of material into any pour-pot, or bander. Safety, reliability and efficiency combine in this machine to create a contractor’s must-have.
Featured In
Safety Built In
Safer Fuel Lines
Fully Equipped with CSA/UL approved regulator to provide precise control over fuel flow to the kettle.”
Flame-Out Sensor
The sealed burner is equipped with a CSA / UL approved flameout sensor which detects flameouts commonly caused by wind and prevents fuel from flowing to the burner
1/2″ Holes
holes in leg channels allow for safe and easy mounting to any truck or trailer
Safety Latch
Kettle is equipped with a latch, which helps keep your lid securely fastened while moving from job to job.
Easy to Operate
Molasses Valve
2″ molasses valve quickly and conveniently dispenses melted crack filler
Manual Agitation
Standard manual agitation allows for easy mixing of material as it melts
Lift Handles
Built-in lifting handles make moving the kettle around the job site a breeze.
Electric Ignition
No more wasting time searching for a striker, lighter or matches. Starting a melter has never been easier with our push button electric ignition
Dual Burners
Two independently operated burners – run both burners for a blazing fast pre-heat or run a single burner to preserve fuel to maintain temperature or when melting speed isn’t important
Reliable
Liquid-Filled Thermometer
The unique liquid-filled thermometer is highly resistant to damage caused by constant vibrations during regular use, which ensures a reliable temperature reading every time
Sealed Burner
The enclosed burner design is shielded from the elements and virtually eliminates flame-outs caused by wind, which are common to torch-fired models.
Built-in Strainer
Built-in strainer prevents valve clogs from unmelted pieces of rubber
Productive
Feet Per Day
Melt crack sealant with ultimate reliability. The RynoWorx RY30mk-Pro melts enough sealant to fill up to 9600 feet of cracks per day
BTUs
The patented dual internal burners provide ultimate control over melting crack filler. Whether you’re looking for a blazing fast pre-heat or simply keeping material warm while active on the job site, the RY30MK-Pro is a must-have for maintenance professionals.
RY10MK
Melter-Applicator- 101bs/46kgs Assembled
- 14 Gauge Steel
- Powder Coated Steel Frame
- 2″ Molasses Valve
- 150,000 BTU Heating Torch
- 10 US Gallons
- 5PSI Max Fuel Pressure
- Up To 3200 Feet per day
RY10MK-PRO
Melter Kettle- 125bs/57kgs Assembled
- 14 Gauge Steel
- Powder Coated Steel Frame
- 2″ Molasses Valve
- 50,000 BTU Sealed Burner
- 10 US Gallons
- 5PSI Max Fuel Pressure
- Up To 4800 Feet per day
RY30MK
Melter-Applicator- 189lbs/86kgs Assembled
- 14 Gauge Steel
- Powder Coated Steel Frame
- 2″ Molasses Valve
- 150,000 BTU Heating Torch
- 30 US Gallons
- 5PSI Max Fuel Pressure
- Up To 7200 Feet per day
RY30MK-PRO
Melter Kettle- 257lbs/117kgs Assembled
- 14 Gauge Steel
- Powder Coated Steel Frame
- 2″ Molasses Valve
- Dual 50,000 BTU Sealed Burner
- 30 US Gallons
- 5PSI Max Fuel Pressure
- Up To 9600 Feet per day
Ready to Buy?
The RY10 Pro is a must-have for any serious asphalt maintenance contractor.